Reduction Block Printing: Rainbow Palm Trees
Over the past few weeks, I’ve been treating myself to what I’m calling Art Camp. Oolite Arts is a Miami Beach-based arts center, with artist residencies, art programs, and classes. Sadly, their classes have been shuttered for months now due to COVID-19 (have you heard about Florida…), but they’ve been offering virtual classes for free. No commute, no pressure, no cost… all that’s left is for me to invest the time.
Hence, Art Camp. Because it’s the weirdest summer ever, so at least I’m going to play with some paint.
I really love block printing so I was excited to join a class exploring reduction block printing, which is a technique I haven’t tried before, taught by Nick Mahshie. He’s the Oolite printmaking resident and a really fantastic teacher.
Reduction block printing produces a layered block print, but each layer comes from the same block – the block is cut away after printing each layer. It requires a LOT of advance planning, because each cut I make in the block impacts the entire future of the design. It’s intimidating because it’s a destructive process by nature. Now that I’ve finished my edition of prints, I can never make more of the exact same, because I’ve carved away and essentially destroyed the parts of the block used to make the first 2 colors of my 3-color print.
For layer 1, I carved away only the whites: the clouds and the highlights along the palm trunks. I had to think of this as “areas where I don’t want ink to be, EVER.” There’s no putting material back once you’ve carved it away.
I had every intention of following the prompt for the class – we all worked from the same source image (a palm tree photo), but each drew our own block images. This process is complicated when attempting it for the first time, so I’m glad the class was structured this way and I was glad we were all on the same page. But when it came time to print, I deviated from the script completely, and abandoned blue sky in favor of this beachy sunset. Because sunset palm trees are the palm trees I know and love.
Printing the gradient was magical. I mixed up four colors: a red-ish magenta, orange, and two shades of blue; and prepped them on an inking plate. As you can see above, I ended up using two inking plates – this helped me get enough surface to really spread the ink properly on the brayer. With one-color prints, it’s easy enough to roll the brayer in all different directions to ensure the whole area is properly inked, but with the gradient it’s crucial to only roll the brayer in one direction. Having more “runway space” with the two inking plates really helped my ink consistency.
After printing this first block, I already loved where this design was going. Next it was time to cut away everything on the block that I wanted to remain “sky”, and this meant cutting the outlines of the palm trees.
I carved away the sky portions of my block, and printed the gray layer of the palm tree silhouettes.
Here, above, is the block from the gray layer. I took this picture after I printed the gray and was starting to carve for the black layer. Planning the outlines for the black layer was tricky, and I found it easiest to draw directly on the block where I wanted the black printed areas to be.
Here is the block for the black layer. Everything is carved away except the final darkest shadows. I had used a washable marker to draw the black shadows, so I washed that away before I started my prints.
The most important part of reduction block printing, or any multi-layer block print, is proper registration. It’s crucial to make sure each layer is aligned, so the overlapping shapes end up where they’re supposed to be. My registration board is just a piece of cardboard, with a rectangle cut to the exact size of the block, and lines drawn on the bottom and right-hand side to align the edges of the paper for each print. I also cut myself a thumb hole to make it easier to remove the block out of the registration jig for each inking.
I also drew a little pencil palm tree on the side to make sure I always placed the block in right-side up! Don’t want any upside-down palm trees.
I made an edition of 12 prints total. I wanted a safe margin because there’s risk of messing up prints at every stage, and, again, there’s no going back and reprinting a previous stage because that block no longer exists. I have a few that didn’t register perfectly – the black and gray layers aren’t quite lined up – but that’s part of the nature of block printing and those prints still have charm. There are also a few where the rainbow gradient is a little blotchy because it was REALLY tough to maintain consistent inking across all the colors. But even that – it’s sky, so as the artist I say that a little bit of blotchiness still… looks like sky!
I was really glad to be working with organic shapes for the first relatively detailed block I’ve carved. The block material is soft, like an eraser, and especially on the final black layer, some of my small details and thin lines just crumbled or peeled away. And this isn’t a big deal, because they’re palm trees! They’re not perfectly uniform anyway. But if I had been trying to carve something like a building, or a design I had been considering – a lifeguard stand – the wiggly lines would become more of an issue. So I may look into different materials in the future if I want to make more precise blocks.
The whole printing process is so satisfying. I love the meditative process of carving, it’s a very “flow” activity for me. I love the methodical work of rolling out the ink for each print, and the sigh of relief when peeling back each successfully printed sheet.
But the best part is the progression. Each stage looked so good. I loved my rainbow sky gradient. It got even better with the gray silhouettes. But that final black detail layer really makes it all pop. Each layer almost felt like it could stand alone, but the final layer comes along and proves them wrong. “This is what you needed,” it says.
I’m taking more classes with Oolite and I highly recommend them! Since they’re virtual, you don’t have to be local. Art Camp for everyone!
I got a lot of questions as I was sharing these prints on Instagram and I hope my explanation of the process is enlightening. It’s such a neat method and I’m really glad I had the chance to try it.
Here’s a sped-up video of me printing the rainbow gradient.
Here’s another outline of the reduction method that really helped everything click for me: Reduction Linocut Method by Natalia Moroz. Such a gorgeous print, too!
And some Pinnables:
One Comment
Cindy P
Lovely work, and fun to see how it’s done! Zoom are classes are the best. I’m in California and have taken classes with Minnesota and Washington state based artist that I never would have been able to join before.